200 Gallon Heavy Weight Emergency Water Storage

Capacity: 200 Gallons
Size: 36"D x 56"H
Weight: 65 lbs.
Ships From: TX
Freight Quote:
Call 1-866-822-0022

200 Gallon Heavy Weight Emergency Water Storage Tank | Poly-Mart Logo

200 Gallon Heavy Weight Emergency Water Storage Tank - Poly-Mart manufactures a 200 Gallon Heavy Weight Emergency Water Storage Tank equipped with all the necessary fittings needed to store an emergency drinking water supply at home. Many families elect to store water in their garage, basement or empty closet in preparation of Hurricanes & Earthquakes, Power Outages or a Contaminated City Water Supply. Storing Potable Drinking Water is usually at the top of the list in practicing practical preparedness. Poly-Mart Emergency Water Storage Tanks enable you to store water outdoors as well! If storing your water outdoors, select a dark color to limit algae growth and store your water in the shade if possible. It's recommended to select Black, Dark Green, Dark Grey or Dark Brown as your color for outdoor water storage.

Poly-Mart Heavy Weight Emergency Water Storage Tanks are made from FDA/NSF Approved, Food-Grade, BPA-Free Polyethylene and has built-in UV Inhibitors to avoid color fading and breakdown from harsh sunlight. The Poly-Mart 200 Gallon Heavy Weight Emergency Water Storage Tank is made in Austin, Texas and is available in a wide variety of colors. Poly-Mart Heavy Weight Emergency Water Tanks are also available in a wide range of sizes including 100125150200250 and 500 gallons. These tanks are all preinstalled with two 3/4" Polypropylene Bulkhead Fittings & ships with (1) 3/4" Lead-Free Brass Spigot and (1) 3/4" Lead-Free Brass Ball Valve Assembly. The Brass Ball Valve Assembly is used at the base of the tank and can be used for filling or draining. The other is located 14" off the ground and off-centered from the fill/drain fitting so that there is never any interference when filling a 5 gallon bucket or pan with water.

Included Hardware Installation: Make sure to apply thread tape to all threads of all included brass hardware prior to installing them into your tank fittings. Be sure to wrap your thread tape against the grain of the threads and be sure to only wrap 2 revolutions. Thread Tape (Teflon Tape) is not included. Install slowly to avoid the chance of cross-threading.

Lockable Stainless Steel Ball Valve Upgrade Option: If you select this option below, your tank will come with (2) 3/4" Stainless Steel Lockable Ball Valve Assemblies in replacement of the pictured Brass Hardware. Stainless Steel is less corrosive, higher quality, doesn't rust and is great for drinking water. However most importantly, this option will allow you to lock your valves with a standard pad lock (pad locks not included). Whether your trying to deter curious children from emtying your water supply or keep someone else from using it, this is a great option!


(2) FREE Collapsible Water Containers INCLUDED with each Emergency Water Storage Tank purchase!


(1) FREE 4 ft. Drinking Water Hose INCLUDED w/ each Emergency Water Storage Tank purchase! 

200 Gallon Heavy Weight Emergency Water Storage Tank by Poly-Mart Features:

  • Industry Leading 5 Year Warranty
  • FDA-Approved, Food-Grade, BPA-Free Polyethylene
  • NSF-Approved Polyethylene
  • 210 Gallons of Total Capacity
  • 36”D x 56”H
  • 65 lbs.
  • 8" Lid w/ Air Vent
  • 3/4” Raised Bulkhead Fitting for Filling a Pot or Pan
  • 3/4" Bulkhead at the base of tank for Brass Ball Valve Assembly 
  • (1) 3/4" Lead-Free High Quality Brass Spigot
  • (1) 3/4" Lead-Free Brass Ball Valve Assembly for Filling/Draining
  • (1) 4ft. Drinking Water Hose for Dispensing your Drinking Water
  • 4 Dome Flats & 4 Bottom Flats for Optimal Tank Customization

200 Gallon Heavy Weight Emergency Water Storage Tank - Light Blue

Download Poly-Mart 200 Gallon Tank Technical Drawing


200 Gallon Heavy Weight Emergency Water Stoage Tank included Components:

200 Gallon Heavy Weight Emergency Water Storage Tank | Drinking Water Hose

Pictured Above are photos of all the items INCLUDED with a purchase of a Poly-Mart Emergency Water Storage Tank! The Lead-Free Brass Ball Valve Assembly is for the bottom fitting of your Emergency Water Tank. The assembly comes with a SCH80 closed nipple to thread into the 3/4" tank fitting, a 3/4" Lead-Free Brass Ball Valve Assembly and a 3/4" Lead-Free Brass Male Pipe to Male Hose End Fitting. Easily attach a hose to the bottom of the tank for filling or draining! The 3/4" Lead-Free Brass Hose Bib is for pulling water out of the raised fitting when the tank is in use.   

200 Gallon Heavy Weight Emergency Water Storage Tank | Color Chart

*If complete FDA Approval is preferred for your application, please select Light Blue, Dark Blue, Dark Green, Black or Natural as your color

**We have a LOW Freight Rate Gaurantee! Call 1-866-822-0022 For Your Quote!**

These Tanks are also known as: Emergency Water Tanks, Emergency Water Storage Tanks, Emergency Water Storage, Emergency Water Barrels, Water Storage Barrels, Blue Water Storage Barrels, 200 Gallon Tank, 200 Gallon Water Tank, 200 Gallon Water Storage Tank, 200 Gallon Emergency Water Storage Tank, Prepper Storage Tanks, Doorway Water Storage Tank, Indoor Water Storage Tank, Garage Water Storage Tank, Basement Water Storage Tanks, Plastic Water Storage Tank, Plastic Long Term Water Storage Tanks, Prepper Water Storage?

The 200 Gallon Heavy Weight Emergency Water Storage Tank by Poly-Mart is made from FDA-Approved, Food-Grade, BPA-Free polyethylene and is designed for above ground use.
  • Item #: PM200EHW
  * Marked fields are required.
Price $384.54
Sale Price $319.95

Popular Add-On Items

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review